歡迎來到紐威包裝技術(常州)有限公司!welcome to Neweigh Packaging Technology (ChangZhou) Ltd

7x24h免費熱線

86-519-85109071

紐威包裝技術(常州)有限公司

紐威包裝技術(常州)有限公司

Neweigh

紐威包裝技術

致力成為稱重、包裝和自動化物流行業的百年經典企業 To be a leader in the automatic weighing, packaging ,palletizing and logistics industry!

紐威-公司簡介Company profile

當前位置:首頁 > 公司簡介

紐威成立初始,就非常重視技術研發隊伍的建設、團隊的培養,從最早期就一直完全地自主研發、制造各種物料的全自動計量、包裝、碼垛生產線、裝車卸車系統和相關上、下游配套設備(比如:氣力輸送、稱重配料等等),產品高速、安全、平穩地完成各種產成品物料(粉狀、片狀、粒狀等)的全自動計量、自動灌裝進包裝袋/包裝箱/包裝桶,全自動地完成后續的封袋/封箱/封桶,全自動地完成后續的檢測、碼垛以及后續的堆垛進庫房或全自動進運輸車廂和從車廂卸車(適合各種規格的密閉的集裝箱、運輸車廂或敞開的車輛全自動裝車、卸車);產品廣泛運用于石油化工、化肥、糧食、飼料、冶金、建材、煤化工、精細化工等等行業及各種深加工產品行業。

中國的第一套TNT炸藥全自動包裝生產線(90年代末期),第一套銨油粉狀炸藥全自動包裝生產線(2010年),第一套粉狀乳化炸藥全自動包裝生產線(2014年,工信部目錄…增26),第一套醇醚減水劑全自動包裝生產線(2006年),第一套粉料聚丙烯全自動氣力輸送、包裝生產線(2000年),第一套過磷酸鈣、第一套甲酸鈉、第一套碳銨、第一套氯化銨、第一套鉀肥、第一套碳酸鈣超細粉、第一套己二酸、第一套二元酸、第一套超細粉阻燃劑、第一套顏料、第一套氯化鈉、第一套氫氧化鈉、第一套氫氧化鉀、第一套砒霜、第一套氫化鉀、第一套氰化鈉等等諸多料性較差、難以處理的物料的自動計量、包裝、碼垛生產線和后續的自動化物流裝車卸車設備均由紐威自主研發、制造,設備長期穩定運行。

From the very beginning of the establishment, Neweigh has been always paying great attention to the technology research & development , and the professional team cultivating & construction. Totally depending on its own team , technology, and patents, Neweigh has been researching and developing the technology of fully automation for weighing, packaging, palletizing and loading & unloading systems/lines, and the according upstream & downstream equipment (e.g. pneumatic conveying, weight batching , etc.).The equipments of the system automatically finishes the high -speed operation of the final products (powder, pellet, flake ,etc.) to be fully automatically weighed in preset value, and then to be filled into bags/ barrels/boxes, and together with the other process of packaging, palletizing, loading /unloading the bags/boxes/barrels into or out of warehouse / vehicles (enclosed or opened carriages/containers) for transportation . It is widely used in various industries (e.g. petrochemical, fertilizer, grain, feed, construction material, metallurgy, coal chemical, etc. & the other various finished products of further processing and so on).

In China, the first line / system of the auto. weighing, packaging, palletizing, loading & unloading equipments for the flammable, explosive, hypertoxic, cohesive, dust fugitive finished products ,and so on, are designed, developed, manufactured by Neweigh, with long-term, stable , secure and reliable operation , such as the following:

TNT explosives (in 1999), ammonium nitrate fuel oil mixture(in 2010), emulsion explosive(in 2014,verified by Ministry of Industry and Information Technology of China in 2014),alcohol ether(in 2005), powdery PP (in 2000, patented technology) ,ammonium chloride, superphosphate, sodium formate, adipic acid powder, binary acid powder, calcium chloride , ammonium bicarbonate, sodium cyanide, editpotassium cyanide, arsenic powder ,etc.

各種全自動稱重包裝碼跺和全自動無人化、全自動無人化車箱內自動堆碼和卸車技術性能簡介:

Technical Specification for Fully Automatic Weighing, Packaging, Palletizing, and Loading/Unloading System of Various Models/Types

1.稱重、包裝范稱圍

range of weighing & packaging: ①1-10kg/bag/box/barrel
②10-20kg/bag/box/barrel
③20-50kg/bag/box/barrel
④40-50kg/bag/box/barrel
⑤50-2000㎏/bag/box/barrel
紐威包裝技術(常州)有限公司

2.計量精度weighing accuracy:

±0.05-0.1/bag/box/barrel 紐威包裝技術(常州)有限公司

3.稱重包裝碼垛和裝車卸車速度

speed for packaging, palletizing, loading/unloading: 6…180mt/hr.or 240…3600/bag/box/barrel/hr. 紐威包裝技術(常州)有限公司

4. 現場粉塵處理后的含量(二種級別的處理效能)

powder/dust content at site after pollution-dealt(2 graded efficiency): ①≤3mg/m3 ; ②≤0.5mg/m3
(detected at 0.5m in flat & 1.3m in height each from the machine)
紐威包裝技術(常州)有限公司

5.適用的包裝袋、包裝箱、包裝桶

bag/box/barrel applied:

5.1.包裝袋bag
5.1-1.包裝袋材質bag materials:
①塑料編織袋(內表面涂膜或外表面涂膜)
PP woven bag with inner or out surface lamination
② 塑料編織袋內襯薄膜袋(外袋可不涂膜)
PP woven bag with inner PE bag
③其他材質的包裝袋(如:PE袋,紙塑復合袋等)
Bags of the other materials(e.g. PE bag, craft paper bag,
paper bag with lamination, etc.)
5.1-2.包裝袋的其他質量要求other requirements for bag:
①克重bag weight:110g/㎡,回生料包裝袋亦可
recycled bags’material available ;
②表面盡可能平整,每只袋的尺寸一致(允許有少許不平整);
Surface is flat , & of same size for each bag
( tiny uneven surface is available);
5.2.包裝桶、箱 box/barrel:
各種重量、材質均可全自動處理
various weight and textures are available;

7.現場自動化程度

degree of automation at site

1人不定期(每1小時左右)到現場巡視,添加包裝袋的縫包線或封口帶/ 包裝箱的封口帶或扎帶/包裝桶的封蓋或封條,添加包裝袋/箱/桶, 處理一些正常設備維護等事宜(如有需要的話)。
1 operator ,at irregular intervals, inspecting the system at operation site,adding new empty bags/boxes/barrels ,or new thread/ adhesive tape /barrel bungs or covers to the according depots, along with doing some maintenance (if needed).

紐威包裝技術(常州)有限公司

6.包裝袋、包裝箱、包裝桶的封口方式

sealing methods for bag/ box/ barrel:

6.1、包裝袋的封口bag sealing
1)將袋口折邊,再用針線縫合;多用于一字邊形的塑編袋、牛皮紙袋等袋的處理folding bag top(mouth), stitching the folded portion ;
2)自動齊邊縫包(線縫)再用冷膠帶包邊(將針眼封牢,確保無粉 塵從針眼處漏出或外部雜質經針眼進入包裝袋內);
Trimming the bag top(mouth),thread-stitching the bag top, covering & pressing mechanically the adhesive tape over the stitches ,preventing moisture/dust /powder from coming into or out of the bags through the stitch holes.
3)自動縫包(線縫)、用熱熔膠帶包邊熱合(將針眼封牢,確保無粉 塵從針眼處漏出或外部雜質經針眼進入包裝袋內);
thread-stitching the bag top, covering the adhesive tape over the stitches , heat-sealing the adhesive tape, preventing moisture/dust /powder from coming into or out of the bags through the stitch holes.
4)自動袋口熱合(針對PE袋)
auto. sealing the bag mouth by heat(only for PE bag);
5)根據用戶現場的實際要求,滿足各種其他的封口要求;
applying the other bag mouth sealing methods up to the actual requirements;
6.2、包裝箱和包裝桶的封口sealing for box/barrel:
根據箱蓋、桶蓋的密封要求,非標設計各種結構的全自動封口,高速、運行平穩可靠nonstandard designing of various sealing methods for various boxes ,and different barrels’ bung/cover for the according barrels, assuring the secure, reliable , stable & high-speed operation;

紐威包裝技術(常州)有限公司

7.現場自動化程度

degree of automation at site

1人不定期(每1小時左右)到現場巡視,添加包裝袋的縫包線或封口帶/ 包裝箱的封口帶或扎帶/包裝桶的封蓋或封條,添加包裝袋/箱/桶, 處理一些正常設備維護等事宜(如有需要的話)。
1 operator ,at irregular intervals, inspecting the system at operation site,adding new empty bags/boxes/barrels ,or new thread/ adhesive tape /barrel bungs or covers to the according depots, along with doing some maintenance (if needed).

紐威包裝技術(常州)有限公司

關注紐威包裝技術

ABOUT US

紐威包裝技術(常州)有限公司 掃一掃,關注我們

聯系我們

CONTACT

紐威包裝技術(常州)有限公司

  • 地址add:江蘇省常州市鐘樓區新福路15號
    A dd. No. 15, Zhonglou District, C Hangzhou City, Jiangsu, China.
  • 電話tel:86-519-85109071
  • 郵箱e.mail:18961165071@189.cn

備案號:

在線服務

SERVICE

Tel 86-519-85109071
Online services
亚洲色欲a片